C4 and C8 power controller modules provide 4 or 8 relay controlled, protected outputs and 4 or 8 access control inputs. When used in a single voltage system, each individual output may be programmed for a continuous output or to respond to the input from the access control system. A fire alarm interface to over ride the access control system for control of egress locks is provided for each output. When used in a dual voltage system, each individual output zone may be programmed to operate with either of the two system voltages.

Product highlights

• Listed for Fire Alarm, Intrusion, Access Control, CCTV and Mass Notification
• Provides 4 or 8 trigger input zones for interface to an access control system
• Provides 4 or 8 relay controlled output zones
• Accommodates failsafe or failsecure locking devices
• Provides fire alarm interface for egress lock control
• Monitors fuse integrity of output zones and reports fault to host power supply
• Status LEDs report zone activity
• Each output zone is fused at 3A or 2.5A for PTC circuit breakers
• PTC versions are low voltage, Class 2 power limited
• Allow selection by zone from two voltage sources