The K-1900-8 panel phone can either auto-dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard (dumb) phone. The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls. The K-1900-8 housing consists of a heavy gauge stainless steel panel, a metal Touch Tone keypad, an armored cable, a heavy duty handset, and an all metal cradle. The K-1900-8 can be easily Touch Tone programmed at the shop or installation site. All programming is stored in non-volatile memory.

For outdoor or harsh environments, the K-1900-8-EWP is available with Enhanced Weather Protection (EWP). The EWP version includes faceplate, transmitter and receiver gaskets, silicon sealed connections, gel-filled butt connectors, as well as a urethane potted circuit board with weather sealed, fieldadjustable trim pots and DIP switches for easy on-site programming.

• Vandal Resistant Features:
  • 12 gauge (0.105″ thick) 316 stainless steel panel with permanent laser etched graphics
  • Armored handset cable
  • Metal cradle
  • Heavy duty metal keypad
  • Hex drive mounting screws
• Weather Resistant Features:
  • Marine grade 316 stainless steel faceplate
  • Marine grade 316 stainless steel screws
  • Internally sealed keypad
  • Gaskets (on EWP models)
  • Equipped with Enhanced Weather Protection (EWP)
• Auto dials one programmable speed dial number (up to 32 digits)
• Multi-number dialer mode adds 5 speed dial numbers (up to 16 digits)
• Touch tone or pulse dialing
• Non-volatile memory, no batteries required
• Operates on analog PABX and key system extensions or analog Centrex and CO lines
• Programmable 6 digit security code
• Touch tone programmable
• Armored 54″ handset cable
• Programmable pre-dial pause
• Blocks fraudulent calls from hand held pocket dialers
• Limited toll restriction in standard touch tone phone mode
• Hearing aid compatible amplified handset with sealed push button volume control
• Programmable default volume level
• Programmable volume control disable
• Equipped with Enhanced Weather Protection (EWP) – EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
• Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
• Flush mount using the included rough-in box or surface mount using a Viking VE-5×10 surface mount box (not included, DOD 424)