adi-insite-ca
Message d'indisponibilité du site - Testssite Anglais - Découvrez les ensembles d’entrée vidéo Comelitpour résidences unifamilialessite Anglais- Économisez plus en achetant nos nouveautésCentre de spéciauxFaites le suivi de vos clients'renouvellements de logicielsDécouvrez les ensembles d’entrée vidéo Comelitpour résidences unifamilialesÉconomisez plus en achetant nos nouveautésCentre de spéciaux
ENDevenir ClientAdresses Des MagasinsAide
ADI a Resideo company
menu
Image of NV-8PS13PVD
Acheter NVT Phybridge

NVT Phybridge NV-8PS13-PVD 8-Channel Power Supply Passive Receiver Hub

NV-8PS13-PVD|NV-8PS13PVD
Acheter NVT Phybridge

NVT Phybridge NV-8PS13-PVD 8-Channel Power Supply Passive Receiver Hub

NV-8PS13-PVD|NV-8PS13PVD

Se connecter prix revendeur

Devenir client ADI
Image of NV-8PS13PVD
NVT Phybridge

NVT Phybridge NV-8PS13-PVD 8-Channel Power Supply Passive Receiver Hub

NV-8PS13-PVD | NV-8PS13PVD

Veuillez vous connecter pour voir les tarifs, consulter la disponibilité des produits et ajouter des articles à votre panier.

Aperçu
Spécifications
Documents

Aperçu

Features:

  • Provides Class 2 SELV camera power while receiving video transmission and delivering P/T/Z telemetry all over a single 4-pair Cat5e cable
  • Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
  • Independently selectable 24VAC-OFF-28VAC with 1 Amp per channel
  • Automatic-reset fault protection; transient protection
  • Individually floating outputs ensure total ground-loop immunity
  • Frequency response DC to 10MHz
  • Diagnostic LEDs show load/no load, miswires, and overload conditions
  • Use with the NV-216A-PV, NV-218A-PVD, or NV-226J-PV transceiver at the camera
  • Power cameras via UTP over significant distances (see Power Distance Chart)
  • 1U high; 8" deep; wall, desk, or rack-mountable, 2ft (60cm) BNC Cables included
  • Limited lifetime warranty
The 8-channel NV-8PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel. Use with NVT's PVDTM transceivers for cable runs under 750ft (225m). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load /no-load, miswires, or fault conditions at a glance. Automatic-reset fault protection, transient protection, and ground loop free individually floating outputs.

Principales caractéristiques

  • Provides Class 2 SELV camera power while receiving video transmission and delivering P/T/Z telemetry all over a single 4-pair Cat5e cable
  • Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
  • Independently selectable 24VAC-OFF-28VAC with 1 Amp per channel
  • Automatic-reset fault protection; transient protection
  • Individually floating outputs ensure total ground-loop immunity

    • Renseignements généraux

    Nom:NVT Phybridge NV-8PS13-PVD 8-Channel Power Supply Passive Receiver Hub
    Category:NVT Phybridge, Batteries & Power Supplies, Power Supplies & Boards, Power Supplies, ADI Pro Rewards
    UPC Code:735890072089
    Country of Origin:. Country of origin is subject to change.

    Spécifications