Product Overview
DMP Unified Power Systems combine FlexPower power modules alongside DMP 734/734N Wiegand Interface Modules in one compact and secure UL Listed solution. This unit is a 150W 12V and 24V DC dual voltage access power system.
The C8 lock control module provides eight access control inputs capable of voltage or dry contact activation, and eight fused outputs programmable for failsafe / failsecure operation at either 12 or 24 VDC and controlled by the integrated fire alarm interface circuit on the FPO. One D8 module provides eight fused outputs and each output is configurable for 12 or 24VDC operation.
Specifications
Input Power
- Input 120/230 VAC 50/60 Hz | 170 Watts (1.41 Amps)
- Overload and short circuit protection
- Over temperature protection
- Polarized AC power supply disconnect
Output Power
- 4A@12V and 4A@24V DC, 150W maximum combined output power
- Outputs: Continuous (DC1) Resettable (DC2)
- 8 auxiliary outputs, fused at 3A each
- 8 control outputs, fused at 3A each
- 120 mV output voltage ripple
- System Efficiency: 88% | System BTU Rating: 66 BTU/Hr
Battery Charging
- Independent built-in 2A charger for sealed lead acid or gel type batteries
- Microprocessor dual rate charging of 12 or 24 V battery sets
- Automatic switchover to standby battery when AC fails
- Zero voltage drop when switched over to battery backup
Supervision
- AC Fail (form "C" contacts)
- System Fault (form "C" contacts) may be triggered by low/no battery, short to earth ground, power supply failure
Visual Indicators
- AC input, DC1 and DC2 output
- System fault | AC fault | Short to earth ground | Reverse battery polarity
- Fire Alarm Input activated
- B100: DC input / output and fault
- C8: DC output and fault
- D8: DC output
Regulatory Compliance
- UL294, UL603, UL1076, ULC S318, ULC S319
- CSA C22.2 #107.1, CSA 22.2 #60950
- CSFM / FCC Part 15, Subpart B, CE
Enclosure Dimensions
- Size: 24.00H x 20.00W x 4.50D in. (61.00 x 50.00 x 11.50 cm)
- Weight: 25 lbs.
Access Panel Mounting
- Pre-installed brackets mount two (2) DMP modules per bracket
General Information
Name : LifeSafety Power FPO150-B100C8D8E4-4DM2 FlexPower DCLASS Unified Access Control Power Supply, 150W, 12 & 24VDC, Fits Eight DMP734 8-Lock, 8 AUX Outputs, in 20" W x 24" H x 6.5" D Enclosure , LifeSafety Power
Category : Power Supply Boards
UPC Code : 815481028302
Specifications
General Information
ADI Part Number : J7-150BCD4D2
Brand Name : LifeSafety Power
Manufacturer : LifeSafety Power, Inc
Manufacturer Part Number : FPO150-B100C8D8E4-4DM2
Product Line : FlexPower
Product Model : FPO150-B100C8D8E4-4DM2
Product Name : FlexPower FPO150-B100C8D8E4-4DM2 150W Power Supply
Product Type : Power Supply
Weight (Approximate) (g) : 11339.809
Technical Information
Efficiency : 88%
Output Voltage : 12 V DC @ 4 A, 24 V DC @ 4 A
Battery Information
Output Voltage (V DC) : 12, 24
Category Specific Attributes
Output Voltage (V) : 12, 24
Physical Characteristics
Depth : 4.50" (114.30 mm)
Depth (mm) : 114.3
Form Factor : Enclosure
Height : 24" (609.60 mm)
Height (mm) : 609.6
Weight (Approximate) : 11.34 kg
Width : 20" (508 mm)
Width (mm) : 508
Power Description
Input Voltage : 120V AC, 230V AC
Input Voltage (V AC) : 120, 230
Output Current (A) : 4
Output Power : 400 W
Output Power (W) : 400
Warranty
Limited Warranty : Lifetime
Miscellaneous
Environmental Certification : RoHS
Environmentally Friendly : Yes
Package Contents : <ul> <li>FlexPower FPO150-B100C8D8E4-4DM2 150W Power Supply</li> <li>Lock</li> <li>2 x Keys</li> <li>Tamper Switch</li> <li>Mounting Hardware for Access Boards</li> </ul>
