Product Overview
The Bogen BPA60 solid-state power amplifier has been designed to fulfill the power amplification requirements of professional and commercial sound systems. The Model BPA60 supplies 60 watts RMS output. Total harmonic distortion is less than 2% at rated output from 50Hz to 15 kHz. Input impedances for the BPA60 are: high-impedance (50k ohms) unbalanced; and low impedance (500/600 ohms, balanced or unbalanced) using the WMT1A Line-Matching Transformer accessory. Line-bridging may be achieved with accessory transformer Model TL100. Hum and noise are at least 85dB below rated output. The BPA60 amplifier may be driven from an amplifier that provides a 25- or 70-volt output (with WMT1A accessory). Output impedances for the BPA60 are: 8-ohm/25V, 16-ohm, 25VCT and 70V. Output regulation is better than 2dB from no load to full load. The BPA60 amplifier is thermally protected to prevent damage due to excessive temperatures. Additional protection is provided by transient protection diodes and an electrical circuit breaker. An illuminated on/off power switch is located on the front panel. An input level control, circuit breaker reset, lo-cut filter switch, and auxiliary receptacle are located on the rear panel. A rack panel kit (RPK53) is available for mounting the amplifier in a 19-inch equipment rack.
General Information
Name : Bogen BPA60 60W Power Amplifier, Black , Bogen
Category : Pro Amplifiers
UPC Code : 765368350098
Country of Origin : China. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : BO-BPA60
Brand Name : Bogen
Manufacturer : Bogen Communications International, Inc
Manufacturer Part Number : BPA60
Product Model : BPA60
Product Name : BPA60 Power Amplifier
Product Type : Amplifier
Weight (Approximate) (g) : 8618.255
Technical Information
Audio Channels : 1
Minimum Frequency Response (Hz) : 20
Audio
Minimum Frequency Response : 20 Hz
RMS Output Power : 60W
RMS Output Power (W) : 60
Total Harmonic Distortion (THD) : 2%
Total Harmonic Distortion (THD) (%) : 2
Energy & Performance
Operating Power Consumption : 180 W
Operating Power Consumption (W) : 180
Physical Characteristics
Color : Black
Depth : 8" (203.20 mm)
Depth (mm) : 203.2
Height : 3.50" (88.90 mm)
Height (mm) : 88.9
Weight (Approximate) : 8.62 kg
Width : 15.25" (387.35 mm)
Width (mm) : 387.35
Power Description
Input Voltage : 120V AC
Input Voltage (V AC) : 120
Product Information
Length : 18.37" (466.60 mm)
Length (mm) : 466.598
Warranty
Limited Warranty : 2 Year
Miscellaneous
Features : Line Level Input
Package Contents : <ul><li>BPA60 Power Amplifier</li><li>Line Matching Transformer</li><li>Ratio Transformer</li><li>Rack Panel Brackets</li></ul>